+
  • undefined
  • undefined

MZ Autogenous mill

The autogenous mill may be directly fed with the raw ore from the quarry or the primary crushed ore. Generally the minerals are fed into the mill in a certain grain-grade ratio, and autogenous mill grinds one time the minerals reaching to 0.074mm which accounts for more than 20%~50% of total products. The grinding ratio can reach 4000~5000, which is ten times higher than ball mill and rod mill. The autogenous is a new grinding equipment with two functions of crushing and grinding, and achieve the grinding by the effect of mutual impact and grinding with the mineral grinded itself as medium. The technology of autogenous is a heavy and advanced improvement on the grinding industry which can apparently increase the economic benefits.

Keyword:

Inquiry:

Detail

MZ Autogenous Mill


The autogenous mill may be directly fed with the raw ore from the quarry or the primary crushed ore. Generally the minerals are fed into the mill in a certain grain-grade ratio, and autogenous mill grinds one time the minerals reaching to 0.074mm which accounts for more than 20%~50% of total products. The grinding ratio can reach 4000~5000, which is ten times higher than ball mill and rod mill. The autogenous is a new grinding equipment with two functions of crushing and grinding, and achieve the grinding by the effect of mutual impact and grinding with the mineral grinded itself as medium. The technology of autogenous is a heavy and advanced improvement on the grinding industry which can apparently increase the economic benefits.

Our company can product the autogenous mill in different series and full specifications and also can design as per the customer’s requirements.

The autogenous mill can be classified by the different technique as dry type (aerofall mill) and wet type (cascade mill). Currently the wet autogenous mill is widely used in China.

There are two kinds of autogenous mill of variable speed and constant speed, some of which is equipped with fretting device. The jacking device for the tube body is settled used for easy maintenance. For the big-scale mill, the hydrostatic bearing has been adopted in order to eliminate static resistance moment at start-up to ensure the mill works safely.

Nameplate and instructions
 


Remarks
Ф7500X2800 wet autogenous mill
MZS 7528 Autogenous mill

 
MZS Autogenous Mill Parameter Table

 

Type

Tube DN mm

Tube  L mm

Granularity mm

Output t/h

Main Motor

Lubricate
station 1/min

Type

Rate kw

Rotation r/min

Voltage

MZS 2409

2400

900

<250

As per the
technique

Z2—111

55

600

220

16

MZS 4014

4000

1400

<350

JR138—8

245

735

380

35

MZS 5518

5500

1800

<400

TDMK800—36

800

167

3000/
6000

50

MZS 6030

6000

3000

<400

TM1250—14/1730

1250

428.5

6000

100

MZS 7525

7500

2500

<400

TM2500—16/2150

2500

375

6000

100

MZS 7528

7500

2800

<400

TM2500—16/2150

2500

375

6000

100

 

 

 

 

Related products

Inquiry